STI manufactures and sells Hot Stamping Presses. The mechanical action of the press incorporates a pair of rolling ball die-set bushes to ensure long, trouble free life and accurate alignment. The frame is strong but simple with a hydraulic height adjustment and a micro stroke adjustment for fine setting. The unique method of heat insulation confines the heat to the platen where it properly belongs.

The timer is a solid-state, pure-dwell, plug-in module and the heat controller uses a platinum heat sensor to ensure excellent heat control. These features add up to a machine that makes a good impression wherever it is used.

Features of the STI Hot Stamp Press
  • Heavy construction of frame
  • Hydraulic lift for head assembly allows one operator to raise and lower head
  • Micro height adjustment speeds final set-up
  • Optional stroke limiter saves 60% of air
  • Solid state heat control, accurate to +/- 1°F
  • Platinum heat sensor eliminates 1% drift found in regular thermocouple
  • Solid state pure dwell timer

Add Features with Optional PLC Controller
  • Digital readout of all controls
  • Solid state foil delay timer
  • Automatic batch counter with shut off features
  • Warning lamps pinpoint problems immediately
  • Removable key supervisory control of all settings
  • Maximum temperature preprogrammed. Will read actual head temperature
  • Fail-safe circuits stop machine if component failure negates hand switch safety circuit
  • 115 V A.C. or 220 V A.C. available on all models

Accessories and Other Equipment Available
  • Four wall chase
  • Additional head slide
  • Electric foil feed
  • Front to back foil feed
  • Air cylinder turntable with 12" diameter stop plate, 6 stations standard (Others on request - requires safety gate)
  • Extra 12" diameter x 1/2" aluminum dial plate
  • Air slide table - 6" x 8" - 6" stroke
  • Hand slide table - 6" x 8" - 6" stroke
  • Safety gate - Wraparound Lexan™ with interlock and reset
  • Vacuum takeoff
  • Machine stand
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 

Item #

Pressure

Impression Area

Distance from Center of Head to Frame

Maximum Part Height

Electrical Requirements

Dimensions

Shipping Weight

Air Consumption (30 cycles/min.)

Maximum Air Line Pressure

N/A 1 Ton 890 kg N/A 6" x 6" (127 mm x 152 mm) 6" x 8" (152 mm x 203 mm) N/A 203 mm 8" N/A 228 mm 9" N/A 5" x 6": 850 Watts 6" x 12": 1400 Watts 6" x 8": 1050 Watts N/A 40" H x 24" W x 24" D N/A 300 lbs. N/A .425 cu. m 15.21 cu. ft. N/A 120 PSI
N/A 1.5 Ton 1285 kg N/A 6" x 12" (152 mm x 305 mm) 6" x 6" (127 mm x 152 mm) 6" x 8" (152 mm x 203 mm) N/A 203 mm 9" N/A 12" 305 mm N/A 5" x 6": 850 Watts 6" x 12": 1400 Watts 6" x 8": 1050 Watts N/A 40" H x 26" W x 26" D N/A 350 lbs. N/A .688 cu. m 24.6 cu. ft. N/A 120 PSI
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1